(Rueil-Malmaison, France) has announced that the DMX process demonstration pilot has been operating in stable conditions since April 2023 to capture the CO₂ present in blast furnace gases emitted during steel production at ArcelorMittal’s Dunkirk site. The objectives are to show the operability of the process, validate good energy performances, confirm the stability of the solvent and demonstrate the purity of the captured CO₂.  

Results obtained since April 2023 are in line with expectations for the technology and confirm, even at this early stage, the efficiency and energy performance of DMX technology. A comprehensive series of operational tests has been conducted with the unit operating 24/7. CO₂ capture rates exceed 90%. The pilot unit produces CO₂ with a high level of purity (> 99.5%) while energy consumption remains remarkably low. Moreover, after thousands of operational hours, no solvent degradation has been observed in spite of the high concentrations of contaminants present in the gas treated.

For Vania Santos-Moreau, 3D and DinamX project manager “After 15 years of development of this innovative technology at IFPEN from proof of concept through to the laboratory, we’re proud to have demonstrated the performance of the DMX process for an industrial gas flow. It’s all thanks to intensive teamwork, conducted with our partners since the launch of the 3D project back in May 2019. And it represents an important step towards the decarbonization of industry in France and around the world.”

Developed and patented by IFPEN, the DMX process, a French technology marketed by Axens, uses an amine demixing solvent to capture CO₂ contained in the flue gases produced by heavy industries. Capture will be necessary in order to reduce industrial emissions.

For Clément Salais, manager of the CO₂ capture team at Axens, “The step we’ve taken with this demonstrator is essential to enable Axens to commit to performance guarantees, and to support our customers in their future decarbonization projects.”